Metal Working Fluid » Aluminium Rolling Oil

Introduction / Specification :

Aluminium Rolling Oil are premium quality, low viscosity straight mineral oil specially developed for cold rolling oil operation of aluminium sheets, strip or foils. Their narrow boiling ranges and high IBP reduce the rate of evaporation which brings down the consumption of oil (Roll Coolant) considerably. The inherent oiliness property reduces the friction to a greater extent and helps the metal reduction without any slippage. Aluminium Rolling Oil is non-staining, noncorrosive and has good additive solubility for fats and alcohols which are added by the manufacturers of aluminium rolling oil for the advantage of smooth productions.

Application / Composition :

Aluminium Rolling Oil are recommended for cold rolling of aluminium sheets, strip or foils.

Aluminium Rolling Oil 80 and 110 (GRADES: 80 & 110)



Packing :

210 Litres Drums.
Date of Issue: DKG/12.11.2008
PDS No. 30600 - 30601.

Introduction / Specification :

Aluminium Rolling Oil 80 & 110 are premium quality, low viscosity straight mineral oil specially developed for cold rolling oil operation of aluminium sheets, strip or oil. Their narrow boiling ranges and high IBP reduce the rate of evaporation which brings down the consumption of oil (Roll Oil Coolant) considerably. The inherent oiliness property reduces the friction to a greater extent and helps the metal reduction without any slippage. Rolling Oil is non-staining, noncorrosive and has good additive solubility for fats and alcohols which are added by the manufacturers of aluminium rolling oil for the advantage of smooth productions.

Application / Composition :

Aluminium Rolling Oil 80 & 110 are recommended for cold rolling of aluminium sheets, strip or foils

Performance Level :

Aluminium Rolling Oil 80 & 110 meets the requirement of IS 14385 - 1996.

Typical Properties :

CHARACTERISTICS Aluminium Rolling Oil
Aluminium Rolling Oil 80 Aluminium Rolling Oil 110
Kinematic Viscosity at 40°C., cSt, 1.50 - 2.10 1.80 - 2.30
Flash Point, °C. (COC), Min. 105 110
TAN, mg KOH / gm. 0.002 0.002
Distillation Range, 
a) IBP 
b) FBP

210 
250

240 
280
We are leading in:

Best quality Aluminium Rolling Oil, High grade Aluminium Rolling Oil, leading manufacturers of Aluminium Rolling Oil, leading suppliers of Aluminium Rolling Oil, leading exporters of Aluminium Rolling Oil.

DISCLAIMER : The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.