Automotive Oil » Hydraulic Brake Fluid

Hydraulic Brake Fluid Dot 3

Introduction of Hydraulic Brake Fluid Dot 3:
Hydraulic Brake Fluid Dot 3 is a red dyed high performance premium quality fully synthetic heavy duty hydraulic brake fluid. It contains anti-oxidant, metal de-activator and corrosion inhibitor for long service life of brake fluid and brake components. Due to its high Equilibrium Reflux Boiling Point (above 205ºC), the vapour locking problem is greatly reduced in high temperature operating condition, especially in cities where stop-and -go conditions require frequent application of brakes. Its excellent low temperature characteristics enable it to function up to minus 40ºC.

Application of Hydraulic Brake Fluid Dot 3:
Hydraulic Brake Fluid Dot 3 is recommended for modern hydraulic braking systems including both disc and drum type.

Performance Level of Hydraulic Brake Fluid Dot 3:
• FMVSS 116 DOT - 3 • SAE J 1703 • IS: 8654 - 2001

Typical Properties of Hydraulic Brake Fluid Dot 3:
CHARACTERISTICS Hydraulic Brake Fluid Dot 3
Colour Red
Kinematic Viscosity at 100°C., cSt, 2.2
Kinematic Viscosity at (-) 40°C., cSt, 1500
Equilibrium Reflux Boiling Point, °C. Max. 205

Packing of Hydraulic Brake Fluid Dot 3: 210 Litres Drum.
Date of issue: 01.07.2009
PDS No. 10500


Hydraulic Brake Fluid Dot 4

Introduction of Hydraulic Brake Fluid Dot 4:
Hydraulic Brake Fluid Dot 4 is a red dyed high performance premium quality fully synthetic heavy duty hydraulic brake fluid. It contains anti-oxidant, metal de-activator and corrosion inhibitor for long service life of brake fluid and brake components. Due to its very high Equilibrium Reflux Boiling Point (above 240ºC), the vapour locking problem is greatly reduced in high temperature operating condition, especially in cities where stop-and -go conditions require frequent application of brakes. Its excellent low temperature characteristics enable it to function up to minus 40ºC.

Application of Hydraulic Brake Fluid Dot 4:
Hydraulic Brake Fluid Dot 4 is recommended for modern hydraulic braking systems including both disc and drum type in various new generation vehicles.

Performance Level of Hydraulic Brake Fluid Dot 4:
FMVSS 116 DOT - 4. SAE J 1703

Typical Properties of Hydraulic Brake Fluid Dot 4:
CHARACTERISTICS Hydraulic Brake Fluid Dot 3
Colour Red
Kinematic Viscosity at 100°C., cSt, 2.2
Kinematic Viscosity at (-) 40°C., cSt, 1300
Equilibrium Reflux Boiling Point, °C. Max. 240

Packing of Hydraulic Brake Fluid Dot 4: 210 Litres Drum.
Date of issue: 01.07.2009
PDS No. 10501


DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.